Pharmaceutical Pump

Hydraulic Actuated Double Diaphragm Pumps

Microtech wide range of comprises of Hydraulic Actuated Diaphragm Pumps (MEMM-IIS1) which have been manufactured adopting superior quality raw material. These can be customized as per the specifications of our clients and have a long performing life. Liquid Contact Materials (Wetted Parts): PTFE Diaphragm AISI 304 AISI 316 Monel Alloy 20 Hast alloy B Propylene Hast alloy C Titanium GFT PP PTFE PVC

SS Self Priming Pump

Head : 35 meter Capacity : 4.8 m3/h Delivery size : 12mm to 25 mm Temperature : -10 to 95 degree Celsiu Test pressure : 10 kg/cm2 Standard futures : Self-prime single & double stage Flange as per din standard Back pull out design Open impeller Shaft sealing by single / doable mechanical seal Sealed grease lubricated , deep grove ball bearing Pump can be offer with electro polishing for some special requirement Also with flame proof motor Pump are available in mono-block and in bare type also with flameproof motor all motor are of TEFC type Very quick prime no need to foot valve Very high suction capacity up to 8 meter Optional futures : Shaft sealing by gland packing Bearing lubricating by oil ANSI drilling on DIN flange Trolley mounting arrangement Various type of connection

Syphons Tube

The Syphon Tube is connected between the pressure gauge & process in applications where high temperature vapours or fluids are present or temperature above 65 Deg C for eg. steam. It acts as a cooling coil and protects the gauge from high temperature vapours, by dissipating heat. A gauge cock is generally connected between the pressure gauge and syphon for isolation. These are normally made from Sch. 80, Sch. 160 and Sch. XXS seamless pipes. M.O.C - carbon steel, alloy steel and stainless steel

Instrumentation Tube Fitting

We sell Single and Double Compression Tube Fittings which are designed for process and Instrumentation tubing which provides a leak proof torque free seal at all the tubing connections, thus eliminating hazardous and costly leaks

LG Valve

Lg valve We manufacture inst. lg valve of highest quality as per specifications given below: Material of construction: SS304,SS316, BRASS, M.S.PP,MONAL, HASTALLOY .A-105 , CARBON STEEL ETC. End connection: threaded/sw/tube end with nut and ferrule or any combination. Size: 1/4" / : / /1" Threads: NPT/BSPT/BSPP/METRIC Pressure rating: 3000 LBS,6000 LBS, 9000 LBS. Pressure testing: pneumatic for seat leakage and hydro for body and seat. Stem point: Non rotating for 1/2" size and above.

Pneumatic Ball Valve

The pneumatic ball valve adopts the two-way double-supply structure. It can be used by the valve and the valve at the same time. The ball valve can be closed and the order can be removed in the state of the front equipment without stopping the work.

syrup Transfer Pump

SS Pharmaceutical Pump

ALCOHOL Transfer Pump

ALCOHOL Transfer Pump Head : 50 meter Capacity : 100 m3/h Delivery size : 12mm to125 mm Temperature : -10 to 95 degree Celsius Test pressure : 10 kg/cm2 Standard futures : Centrifugal single stage Flange as per din standard Back pull out design Open / close impeller Shaft sealing by single / doable mechanical seal Sealed grease lubricated , deep grove ball bearing He pump handle liquid having viscosity up to 1500 centrioles Also with flame proof motor

Spirit Transfer Pumps

Head: 48 meter Capacity: 80 m3/h Delivery Size: 12mm to 65 mm Temperature: -10 to 95 degree Celsiustest Pressure: 10 kg/cm2