PTFE FILTER CARTRIDGE
FEATURES
Absolute rated & precisely controlled pore size distribution for superior & constant bacterial retention
FDA approved
Inherently Hydrophobic Expanded PTFE Micro Porous Membrane For Broad Chemical compatibility & to prevent moisture obstruction in venting & wet air filtration
PTFE membrane has excellent chemical resistance
Low-pressure drop and high flow rate due to High Filtration area of 0.7 m Per 10 cartridge
End caps and connectors are sealed by the thermal bond, free binder.
Autoclave sterilization features
Integrity test is possible
SPECIFICATIONS
Sizes: 10, 20, 30, 40 Long
Micron Rating: 0.05, 0.1, 0.2, 0.45 , 1 Micron
Filtration Area: More Than 0.7 m2 Per 10 cartridge
Outer Diameter: 69 mm
Inner Diameter: 28 mm
APPLICATIONS
Filtration of strong acid, base solutions, solvent & DI Water
Terminal Fine Filtration of DI Water System
Vent Filtration
Gas Purification
Compressed Air Filtration

Price:
Filter Type : Cartridge filter housing
Connecting Type : Other, 1/2 to 1 BSP/NPT threaded ports
Temperature Range : 2C to 50C
Material : Polypropylene (PP), Polycarbonate, ABS
Diameter : Approximately 4 inches (outer)
Flow Rate : 5 to 40 LPM (depends on size & cartridge)
Filter Type : Cartridge Filter
Connecting Type : Other, Threaded (BSP/NPT)
Temperature Range : 0C to 50C
Material : Polypropylene plastic housing with SS mesh
Diameter : Jumbo Size
Flow Rate : Max 50 LPM (Litres Per Minute)
Filter Type : Dust Collection Cartridge
Connecting Type : Other, Flange or Threaded End Cap
Temperature Range : Ambient to 80C
Material : Synthetic Polyester / Cellulose
Diameter : 325 mm
Flow Rate : 1800 3500 m/hr
Filter Type : Spun PP Cartridge
Connecting Type : Other, DOE (Double Open End), SOE (Single Open End)
Temperature Range : Up to 60C
Material : Polypropylene (PP)
Diameter : 2.5 inch (standard), others available
Flow Rate : 1040 LPM (varies with length and micron)