Bottom Entry Machines

Get a Price/Quote

Bottom Entry Machines Specification

Voltage
220/ 415 Volt(v)

Cooling System
Air Cooling

Frame Type
Metal Frame

Noise Level
low db

Machine Type
homogenizer

Features
Heavy Duty

Frequency
50/6 Hetrz (Hz)

Usage & Applications
Industrial

About Bottom Entry Machines

Bottom Entry Machines

MICROTECH ENGINEERING Bottom Entry mixers are typically used in conjunction with a stirrer/scraper unit. It emulsifies, homogenizes, solubilizes, suspends, disperses and disintegrates solids. The bottom gives high shear homogenization while the stirrer/ scraper distribute the homogenized output uniformly throughout the vessel. This is ideal for high-viscosity cosmetic, pharmaceutical and food products. They can also be used on low viscosity products to wet our powders. Clean-in-place design with a simple, easy to clean construction.

Aeration free

Self-pumping

No bypassing

Interchangeable warheads

Sanitary construction

Easy maintenance

Lower power requirements

Reduces particle size

Rapidly dissolves solids

Accelerates reactions

Sealing: Single mechanical shaft sealing: A single carbon/ceramic mechanical shaft seal with viton elastomers is standard. Other face materials and elastomers are available as optional extras. Double mechanical shaft sealing: These are required when processing products that are abrasive, sticky or viscous or when the system is under vacuum. Sealant flushing systems can be supplied as optional extras.

Operating pressures: All standard models are designed for operation on pressures not in excess of 40 psig (2.8 bar). High-pressure units are available upon request.

Materials of construction: All wetted parts are in 304/316 304L/316L stainless steel. Special materials on request. Electropolished finish is available as an optional extra.

Cleaning: Clean-In-Place (CIP) design. Simple, easy to clean construction.

Motor specifications: TEFC, washdown duty and explosion proof motors are available as standard. Inverter rated, stainless steel and other motors are available as optional extras.

Mounting: Stainless steel flange fitting is available as standard. Clamp-on fitting is optional for smaller machines.

Operating pressures: All standard models are designed for operation on pressures not in excess of 40 psig (2.8 bar). High-pressure units are available upon request.

Ultra sanitary: model available with features including:
- Crevice-free construction
- Sanitary metal bellows shaft seal

- Electropolished finish

Tell us about your requirement